The Toyota RAV4 is a family suv / c/d-segment 4x4 that, on current UK trim, has flush roof rails. That single classification determines almost every other decision, which brand’s fitting kit lists your car, whether the crossbars sit low and quiet or up on visible feet, and how the kit clamps down.
Two load figures do most of the work when picking bars. The dynamic load rating is what the rack can carry while the car is being driven and is usually 50 to 75 kg on passenger cars; the static rating is much higher and applies while the car is parked, which is where roof tents live. Both figures sit under the vehicle’s own roof-load rating printed in the handbook, and that owner’s-manual figure is the number an insurer would look at after a claim.
Motorway noise is worth thinking about too. Round or square bars are cheaper and no less safe, but they whistle noticeably above 60 mph; aero-shaped bars cost more, run quieter and cost a fraction less at the pump when empty. If the Toyota RAV4 is a daily motorway car, aero bars usually earn their keep; if the rack comes out a handful of times a year, plain bars do the job.
Frequently asked questions
What roof type does the Toyota RAV4 have?
On UK cars the Toyota RAV4 has flush roof rails. The 2019-on RAV4’s rails count as flush rails: bars made for the raised rails of the 2013-2018 car do not fit. We did not find a published roof load for this car in the sources we checked: use the figure in the handbook.
What is the difference between dynamic and static load?
Dynamic is the maximum load the rack can carry with the car being driven, the smaller of the two figures. Static is the parked figure, and roof tents must respect it. Both are still capped by the vehicle’s own roof-load rating.